WEG MW500 Bedienungsanleitung PDF herunterladen (Seite 9)

MW500 | 3

General Information

- English -

2 GENERAL INFORMATION

2.1 ABOUT THE MANUAL

This manual contains information for the proper installation and operation of the drive,

as well as start-up procedures, main technical features and how to identify the most

usual problems of the different models of the MW500 series of drives.

ATTENTION!

The operation of this equipment requires detailed installation and operation

instructions provided in the user’s manual, programming manual and

communication manuals. The user’s manual and the quick reference of the

parameters are supplied at the purchase of the drive, while the guides

are supplied with their respective accessories. Other manuals are only

supplied in CD-ROM, which comes with the drive, or can be downloaded

in WEG’s website - www.weg.net. This CD must be always kept with this

equipment. A printed copy of the files available in the CD can be requested

at your local WEG dealer.

NOTE!

It is not the intention of this manual to present all the possibilities for the

application of the MW500, as well as WEG cannot take any liability for the

use of the MW500 which is not based on this manual.

2.2 ABOUT THE MW500

The MW500 is a high-performance, decentralized motordrive with IP66 degree of

protection which allows speed and torque control of three-phase induction motors. This

product features vector (VVW) and scalar (V/f) control - both programmable according

to your application.

In the vector control mode (VVW), the operation is optimized for the motor in use,

providing a better performance in terms of speed regulation.

The scalar mode (V/f) is recommended for simpler applications, such as the activation

of most pumps and fans. The V/f mode is used when more than one motor is activated

by a drive simultaneously (multimotor applications).

The MW500 can be mounted on the motor or on the wall, depending on the application

requirements.

The MW500 drive also provides PLC functions (Programmable Logic Controller) by

means of the SoftPLC (integrated) feature. For further details regarding the programming

of those functions on the MW500, refer to the SoftPLC user's manual of the MW500.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 54 55

Keine Kommentare

WEG MW500 Bedienungsanleitung Seite 9