WEG MW500 Bedienungsanleitung PDF herunterladen (Seite 27)

MW500 | 21

Keypad (HMIR) and Basic Programming

- English -

4.3 OPERATING MODES OF THE HMIR

The HMIR must be configured via hardware on S10 DIP-switch before the operation.

The S10 is shown in figure A.2 of Appendix A. For recognizing the HMIR the drive can

be adjusted as shown in ta b le 4.1.

Table 4.1: S10 DIP-switches configuration

Switches Status

S1 ON

S2 OFF

S3 OFF

S4 OFF

The monitoring mode allows the user to view up to three variables on the main display,

secondary display and bar graph. Such fields of the display are defined in figure 4.2.

The setting mode is composed of three levels: Level 1 allows the user to select the Menu

items in order to browse the parameters. Level 2 allows browsing the parameters of the

group selected by level 1. Level 3 allows the modification of the parameter selected in

Level 2. At the end of this level, the modified value is saved or not if the key ENTER or

ESC is pressed, respectively.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 54 55

Keine Kommentare

WEG MW500 Bedienungsanleitung Seite 27